Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
LCD Monitor 19" 4:3
- Thread starter DrPinball
- Start date
Don't bother with an LCD get yourself a 19 inch trinitron tv from the tip or eBay, make sure the scart socket on the back has ... 3 little dots these indicate RGB in, then it's just a quick cable to knock up.
I've done this a few times now and it's pretty easy to do.
My Naomi has a 29 inch trinitron setup, not the lightest of tubes, 40Kg but looks awesome.
You will need an ultimarc arcade graphics card, or a compatible card or in board chipset and use soft 15Khz.
Install groovymame and the calamity drivers and it will look superb.
Cheers
David
I've done this a few times now and it's pretty easy to do.
My Naomi has a 29 inch trinitron setup, not the lightest of tubes, 40Kg but looks awesome.
You will need an ultimarc arcade graphics card, or a compatible card or in board chipset and use soft 15Khz.
Install groovymame and the calamity drivers and it will look superb.
Cheers
David
No worries, once I get my control panel back from the powder coaters I will get some pics up.
I've been using mame since 1999 and only recently got the calamity / groovymame setup installed.
I've now got 20 odd pcbs that will getting sold now as the emulation is almost perfect.
I've been using mame since 1999 and only recently got the calamity / groovymame setup installed.
I've now got 20 odd pcbs that will getting sold now as the emulation is almost perfect.