What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Wanted Judge Dredd wireform ramp that leads to left inlane wanted.

John Beveridge

Registered
5Years
Joined
Sep 18, 2015
Messages
529
Location
East Kilbride
IMG_20230507_195105.jpg
IMG_20230507_195105.jpgIMG_20230507_195034.jpg
 
As pictured above i am looking for a wireform ramp for my Judge Dredd pinball. It is the one leading to the left inlane . If anyone can help out ,please let me know how much you want for the ramp.

Thnaks,
John.
 
Thanks for that Mark,

I was just trawling through countless sites looking for one when your message came through,

Cheers,
John.
 
i bought a ton of spare parts when i had a JD a couple of years ago, they have sat in the garage since, not sure what i have but i'll look and let you know. is yours busted?
 
Yes it has broken quite badly just where the ball drops out of the wireform. The two metal guides were needing welded when i bought it last year and now the U shaped metal end bit is split on both sides so pretty messed up ! I also have a broken air raid ramp which if you had one i`d buy too ! Pushing my luck but just in case you had one !

Thanks,
John.
 
can you PM me photos of what you need, I don't have the machine any more just a box of bits so i'll need some photo assistance to identify what you need.
 
OK will do Mark,

The left wireform there is a photo of that at the top of the ad, basically ramp bit with two wires going to the U shaped metal ball stopper. The air raid ramp is a short plastic ramp situated at top right of the playfield with a decal with the words air raid and a red arrow on it. It may have a small plastic still attached that says sniper tower on it. It`s a very small ramp that doubles back on itself returning the ball. I will get my other half to photo it later when she gets back in. I cannot work her fancy phone/camera thing i`m afraid !

Cheers,
John.
 
1683640772079.jpeg

Is this the ramp? I don’t have one just trying to help with a picture?
 
Ramp looks to be hard to find there a secondhand one on pinside? I think it’s ramp A-16579?

There is a thread on pinside that suggests freeplay40 or pin-pimp notable ramp reproduction members on there might do replacement ramps you would have to drop him a message and see.
 
Last edited:
There’s a chap in America selling the ramp I believe it’s this one? A-17132?
Might be easier to get your old one welded up?
Yes i did see that one Tony, just that the shipping is very high and there probably will be other charges on top. I have friend who has offered to weld so it might be worth a go rather than spend that amount. I will check out those other possibilities too.

Thanks very much for trying to help it is appreciated.

John.
 
Back
Top Bottom