Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
JJP Mirror Blades
- Thread starter Carl85
- Start date
Yes
D
Deleted member 2463
yes, but be very careful with them. There is very little clearance on JJP machine for blades.
Neil.
Neil.
Oh is there? Not fitted them on any of mine. May be worth leaving then
Sent from my iPhone using Tapatalk
Just get a pair of cab side protectors that pinball universe sell or make something up to slide between playfield and cab.
Yeah that’s a good shout. Think there only £20odd. Will have a look [emoji106]
Sent from my iPhone using Tapatalk
Not a chance of mirrors sliding between the pf on my Hook so I cut narrow slithers from HIP sheet that sit on top of the pf, do need to remove them when lifting the pf. Could cut at least 1 or maybe 2 sets of spares from a single HIP sheet.
Oh really? I will look in to that option. Need to check the game when I get home to see what the clearance is
Sent from my iPhone using Tapatalk
Check out @Solar Sailer thread, he's local to me and I used his offcuts
https://www.pinballinfo.com/community/threads/diy-hips-mirror-blades.46356/
xianek
Site Supporter
They may or may not fit depending on the design. I have a different shape for Jersey Jack pinballs and a different shape for WPC and a different one for WPC 95. But I also have one that works for WPC 95 and WPC.