Wintonmartin
Site Supporter
Does anyone happen to have 4m yellow and 4m yellow/white going spare?
Only place I can see that sells it is planetary pinball
Only place I can see that sells it is planetary pinball
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Found it! Harness wiring
- Thread starter Wintonmartin
- Start date
OP
OP
Wintonmartin
Site Supporter
Cheers Dave!
Can you help with the conversion? I'm assuming it's 18 gauge wire and conversion says 1mm 16amp. On the site it says 1.6mm 3amp
It's for GI input
Can you help with the conversion? I'm assuming it's 18 gauge wire and conversion says 1mm 16amp. On the site it says 1.6mm 3amp
It's for GI input
I asked him this same question a few years ago, and what AWG the wire related to 
This was his response:
--
Use CAB003-X and CAB005-XX for general use and CAB004-X for power applications.
--
So still not 100%, but at I guess I would say that
CAB004 ~ 16AWG (coils)
CAB003-CAB005 ~ 18AWG (GI)
CAB001 ~ 20 AWG (Switches)
This was his response:--
Use CAB003-X and CAB005-XX for general use and CAB004-X for power applications.
--
So still not 100%, but at I guess I would say that
CAB004 ~ 16AWG (coils)
CAB003-CAB005 ~ 18AWG (GI)
CAB001 ~ 20 AWG (Switches)
OP
OP
Wintonmartin
Site Supporter
Top man!
I'll just order yellow/black and DYMO flag it at each end and maybe change at a later date if I ever order from PP
I'll just order yellow/black and DYMO flag it at each end and maybe change at a later date if I ever order from PP