What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Get Pinball Stuff Done !

Sgt GrizZ

Sgt GrizZ

Site Supporter
10 Years
Joined
Jul 21, 2011
Messages
11,641
Location
Ex PinballInfo Admin . MIA Brighton Hove beach
My pin mojo has been pretty low since summer ... in an attempt to kickstart it I'm gonna crack on with some jobs that have been on the list forever


#1 Fit new R2 head spin motor to Star Wars . It's only been sat here 6 months :D

#2 Tidy up interior scratched up side walls of Nascar / or side blade them - the only thing letting down an otherwise very nice machine.

#3 Rewire the Mick On A Stick switch. The wire has got damaged over time and sometimes causes phantom hits. Been like that a year 😁

#4 Skateball - fit brand new drop targets and pop bumpers. Had them about 3 years 😆

#5 Fish Tales - needs reel belt replacing. Sometimes slips. Don't think it is an original.

#6 Tommy - been about 10 years since last full re rubber. Needs doing.

#7 TZ - swap in a Clear main ramp for the original smokey one. Bought the ramp years ago. First I need to get TZ home ...it's only been in storage about 7 years 😆

#8 Space Station - swap in brand new transparent blue main ramp (Freeplay40 repro) . Had this about 2 years now. Machine lives at my mums though ...3 hours away :rolleyes:


I'm sure everyone has a list of 'important' jobs that somehow haven't been done.
 
Decided to replace the prison bash toy on my TWD, so I got this
 

Attachments

  • 79E4AD3A-DE59-4548-9EA1-546F512D99F8.png
    79E4AD3A-DE59-4548-9EA1-546F512D99F8.png
    72.3 KB · Views: 31
I'm sure everyone has a list of 'important' jobs that somehow haven't been done.
Click to expand...

#1 Finish the shop job/refurb on TZ. Underside of the pf is almost all back together but the top needs doing plus some minor board and connector work.

#2 Finish the shop job/refurb on Torpedo Alley. Top side of pf stripped but everything needs cleaning and then rebuilding.

#3 Re-pin the big connector blocks on Jungle Lord that connect the playfield to the backbox

#4 Take the monitor out of Outrun and send the chassis off for repair

#5 Rewire my cocktail vid cab to Jamma and install a 60 in 1 to play classic shooters (Galaga, Galaxian etc)

#6 Rebuild Fish Tales 🤣 It must be getting close to 9 years since I took it to bits!

#7 Think about when I might get round to restoring TAF and Fathom :rofl:
 
ronsplooter said:
#1 Finish the shop job/refurb on TZ. Underside of the pf is almost all back together but the top needs doing plus some minor board and connector work.

#2 Finish the shop job/refurb on Torpedo Alley. Top side of pf stripped but everything needs cleaning and then rebuilding.

#3 Re-pin the big connector blocks on Jungle Lord that connect the playfield to the backbox

#4 Take the monitor out of Outrun and send the chassis off for repair

#5 Rewire my cocktail vid cab to Jamma and install a 60 in 1 to play classic shooters (Galaga, Galaxian etc)

#6 Rebuild Fish Tales 🤣 It must be getting close to 9 years since I took it to bits!

#7 Think about when I might get round to restoring TAF and Fathom :rofl:
Click to expand...

Lazy Sunday afternoon should take care of that lot Chris 😆
 
Sgt GrizZ said:
My pin mojo has been pretty low since summer ... in an attempt to kickstart it I'm gonna crack on with some jobs that have been on the list forever


#1 Fit new R2 head spin motor to Star Wars . It's only been sat here 6 months :D

#2 Tidy up interior scratched up side walls of Nascar / or side blade them - the only thing letting down an otherwise very nice machine.

#3 Rewire the Mick On A Stick switch. The wire has got damaged over time and sometimes causes phantom hits. Been like that a year 😁

#4 Skateball - fit brand new drop targets and pop bumpers. Had them about 3 years 😆

#5 Fish Tales - needs reel belt replacing. Sometimes slips. Don't think it is an original.

#6 Tommy - been about 10 years since last full re rubber. Needs doing.

#7 TZ - swap in a Clear main ramp for the original smokey one. Bought the ramp years ago. First I need to get TZ home ...it's only been in storage about 7 years 😆

#8 Space Station - swap in brand new transparent blue main ramp (Freeplay40 repro) . Had this about 2 years now. Machine lives at my mums though ...3 hours away :rolleyes:


I'm sure everyone has a list of 'important' jobs that somehow haven't been done.
Click to expand...

UPDATE ............... done none of these :rofl::rofl::rofl:

Star Wars needs a switch replaced also. Noticed that about 4 weeks ago :rofl:
 
You must log in or register to reply here.
Back
Top Bottom