Found it! Fly/lure switch cover wanted for Fish Tales

[VeeMonroe]

I'm in London in the UK and missing a bracket/cover from #A-15404, the reel entry ramp assembly, on my Fish Tales (see picture below).

I'd like to either:

1. Buy the reel entry ramp assembly (this part: https://www.marcospecialties.com/pinball-parts/A-15404);
2. Buy the missing bracket;
3. Donate to a generous soul who has access to a Fish Tales and can measure the missing bracket, including any screw holes, and either:
   1. provide some dimensions I can use to template the missing bracket;
   2. Or, even better, make a template for me that I can use to have the missing bracket custom manufactured.

Any leads on where near London I might buy a bracket or find a complete Fish Tales on which I can measure the bracket, would also be greatly appreciated!

Thank you!

 

[paddythegreek]

This is what he’s after folks.

 

[VeeMonroe]

I’ll change the title.

 

[crsedgar]

Ministry sell the decal as part of a set if you go down the fabrication route.

My FT was also missing the bracket, fabrication was next for me but ended up selling it before I got around to it.

Hopefully someone can get you the measurements.

https://www.ministryofpinball.com/en/fish-tales-playfield-decal-set.html

 

[VeeMonroe]

Ministry sell the decal as part of a set if you go down the fabrication route.

My FT was also missing the bracket, fabrication was next for me but ended up selling it before I got around to it.

Hopefully someone can get you the measurements.

https://www.ministryofpinball.com/en/fish-tales-playfield-decal-set.html

Thanks! I’ve already ordered that decal Just need the measurements, now