More than happy to keep this but a machine I have been after has come up and it's one in one out. So I am putting this out on the market.
purchased off Andy last year as a players condition EBD. Has a few bulbs out, needs a clean and obviously the cab artwork needs work. But it is a working machine that can be played as is and is still a lot of fun. I have attached the original listing as the machine is in the same condition. There were some bare wood sections where the paint had been chipped away that I covered in some black paint just to protect it from the winter cold. So the paint job is not great, but let's be honest anyone serious about owning this machine is looking to redo the cab art to get it back to its original. Its a very good starting point for a project ast 90% of the work is cosmetic.
Points to Note.
- Works as plays at it should. I am not an expert but have had no obvious issues.
- Has an Alltek MPU and Solenoid board (I have an Alltek Lamp Driver board that I could sell at additional cost)
- Oirignal squak and talk. Works fine, occasionally stumbles but has been pretty solid. (I have a Geetech replacement that does some really cool things that I can sell at additional cost) https://geeteoh.com/squawktalk.shtml
- Lots of Mylar on the playfield - Has preserved most of the art. Any wear can be seen in the pics.
- Flippers feel strong to me, can be slightly sticky, but again they are more than serviceable
- Black glass in really good shape. Few small small nicks but it's pretty perfect.
- All displays work
- Coin mech is pretty solid takes a 50p
- legs have some rust but wouldn't take much work to make nice again.
See the original listing here - https://www.pinballinfo.com/community/threads/eight-ball-deluxe-£2000.59261/
Looking to get my money back at £2000. I am in Brentwood just off the M25. Martin has been to me many times.
Thanks - Anthony
purchased off Andy last year as a players condition EBD. Has a few bulbs out, needs a clean and obviously the cab artwork needs work. But it is a working machine that can be played as is and is still a lot of fun. I have attached the original listing as the machine is in the same condition. There were some bare wood sections where the paint had been chipped away that I covered in some black paint just to protect it from the winter cold. So the paint job is not great, but let's be honest anyone serious about owning this machine is looking to redo the cab art to get it back to its original. Its a very good starting point for a project ast 90% of the work is cosmetic.
Points to Note.
- Works as plays at it should. I am not an expert but have had no obvious issues.
- Has an Alltek MPU and Solenoid board (I have an Alltek Lamp Driver board that I could sell at additional cost)
- Oirignal squak and talk. Works fine, occasionally stumbles but has been pretty solid. (I have a Geetech replacement that does some really cool things that I can sell at additional cost) https://geeteoh.com/squawktalk.shtml
- Lots of Mylar on the playfield - Has preserved most of the art. Any wear can be seen in the pics.
- Flippers feel strong to me, can be slightly sticky, but again they are more than serviceable
- Black glass in really good shape. Few small small nicks but it's pretty perfect.
- All displays work
- Coin mech is pretty solid takes a 50p
- legs have some rust but wouldn't take much work to make nice again.
See the original listing here - https://www.pinballinfo.com/community/threads/eight-ball-deluxe-£2000.59261/
Looking to get my money back at £2000. I am in Brentwood just off the M25. Martin has been to me many times.
Thanks - Anthony
