DMD issue. Tommy, also any service techs in NE?

[Nige4554]

Can anyone advise what’s up with DMD, I have reseated all the pins. Before I go and buy a cable any ideas? Thanks

 

[Calimori]

I would need to go back through my notes but had a similar issue when what I suspect was a failure of the PAL chip on the DMD board.
Someone sent me a spare board to confirm the issue was on the board. So I bought a replacement board and never got around to fixing it. I was going to try these:

Pinball PAL DISPLAY SET (2 chips) Data East | eBay

I can provide ROMS and EPROMS for all pinball machines.

www.ebay.co.uk

 

[Asiapinball]

Where are you in the North East? I'm happy to help out if you struggle to fix it with the online help you will get from here.

 

[Nige4554]

Where are you in the North East? I'm happy to help out if you struggle to fix it with the online help you will get from here.

Thanks, just outside Darlington off the A1 towards Bishop Auckland. I have a spare DMD, I will try that once I get the software download from pin2dmd. I will let you know how I get on

 

[Asiapinball]

Most stuff can get fixed by carefully following what people tell you on here but always useful to know you have a back up in case. I'm the other side of Hexham from you but regularly pass through Bishop Auckland on my way South so happy to pop by if you get stuck.

 

[Asiapinball]

Thanks, just outside Darlington off the A1 towards Bishop Auckland. I have a spare DMD, I will try that once I get the software download from pin2dmd. I will let you know how I get on

I think you can just run the pin2DMD without the software download if it is the colouration files you are talking about. You just will not get the colours.