Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Found it! DMD Dot Matrix Display for WPC
- Thread starter benNinja
- Start date
Yep. Ex-TZ. That ok for you?
i also have some spare after fitting colourDMDs, could bring along to Tilt tomorrow (if you're going) to avoid posting.
Make sure it’s not a faulty dmd driver board that blew your dmd up you don’t want to fry another
£80 delivered - It’s entirely up to you.
Yes that's what im doing before i buy another. I'm considering rebuilding the high voltage section. Is there anything else that can be done? I tested the voltages coming out and on pin 1 and 2 they are higher than the specification.