P
paul parker
Wanted 1 set of flipper switches for a dataeast lah I bought a pair from pinball mania and they are to short
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
- Joined
- Jul 21, 2011
- Messages
- 2,474
Hi Paul. You are welcome to return any unwanted parts for refund. LAH used the older style 180-5048 leaf switch. These are still available to special order but are much more expensive. The ones you bought are the improved design used in later models which can be used, they just need remounting higher up the cabinet. Usually the upper existing hole can be used for the lower hole and you just need to make a new hole for the top.
OP
OP
paul parker
My mistake andy I didn't realise when I bought them they were cabinet ones I was after the ones that go on the flipper assemblys
- Joined
- Jul 21, 2011
- Messages
- 2,474
Maybe my mistake. I assumed cabinet switches. Looks like you ordered 180-5124 which should be correct for LAH according to the manual. Can you post or send me a picture of the flipper mech that you are fitting them into and the eos switches that are too short.
OP
OP
paul parker
OK il sort when I'm home
OP
OP
paul parker
It's ok andy il keep them I've sourced one now