It looks like one of the connectors on the ribbon cable between my coin mech and credit board is faulty. I say 'looks like' but it's pretty obvious; the plastic looks to be broken and the wire is missing. No idea how it's happened but it's a probable reason why the credit board isn't registering coins.
So, what i'm after is either a new credit board to coin mech ribbon cable (1x13pin) or someone who could possibly fit a new connector on the end of my existing cable.
Here's a picture of the connector on the ribbon cable.
I know nothing about the various connector types or the technicalities of these things so please bear with me. If you do have any questions though then please let me know.
So, what i'm after is either a new credit board to coin mech ribbon cable (1x13pin) or someone who could possibly fit a new connector on the end of my existing cable.
Here's a picture of the connector on the ribbon cable.
I know nothing about the various connector types or the technicalities of these things so please bear with me. If you do have any questions though then please let me know.