THIS DOES NOT FIT WILLIAMS PINBALL MACHINES WITHOUT SOME CARPENTRY
I stripped this coin door out of my recently acquired banzai run. It is not the same size as a standard Williams pinball coin door, so my game had been adjusted (door slot widened) to make it fit
The coin mech recognises £1 coins, as this is how the former owner of my banzai had the game set up, the signal was recognised by banzai and games were credited accordingly
The coin/game counter mech does increase the digits shown when you put coins through the mech.
I am keeping the williams system 11 coin door buttons and their pinball wiring that you can see in the bottom photo. The rest is included with the sale
£20 plus delivery, or you are welcome to collect
I am tagging @KEITH SMITH , @t-m , @rockhouse in case they are interested in this
I stripped this coin door out of my recently acquired banzai run. It is not the same size as a standard Williams pinball coin door, so my game had been adjusted (door slot widened) to make it fit
The coin mech recognises £1 coins, as this is how the former owner of my banzai had the game set up, the signal was recognised by banzai and games were credited accordingly
The coin/game counter mech does increase the digits shown when you put coins through the mech.
I am keeping the williams system 11 coin door buttons and their pinball wiring that you can see in the bottom photo. The rest is included with the sale
£20 plus delivery, or you are welcome to collect
I am tagging @KEITH SMITH , @t-m , @rockhouse in case they are interested in this
Last edited: