As my Bram Stoker's Dracula slowly goes back together, I need to sort out this long mounting post that hold up the large ramp at the back right corner.
The bolt head had broken off and when I attempted to drill it out, I realised that I was just supplying heat and fusing the metals parts together. I was going to use my Dads lathe and tap out a new hole but my Dad's health faded and it isn't now an option.
Does anyone have one available as I can't find a supplier?
The manual says:
02-4765-5, 8-32 x 4.81"
My measurement is 4 13/16" or 12.2cm
Screwdriver for reference, I do not need one of these.
The bolt head had broken off and when I attempted to drill it out, I realised that I was just supplying heat and fusing the metals parts together. I was going to use my Dads lathe and tap out a new hole but my Dad's health faded and it isn't now an option.
Does anyone have one available as I can't find a supplier?
The manual says:
02-4765-5, 8-32 x 4.81"
My measurement is 4 13/16" or 12.2cm
Screwdriver for reference, I do not need one of these.