As per the pic I need a couple of the brown spacers please or what’s the material called so I can make some. Thanks Ken
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Wanted Bridge rectifier insulating spacers
- Thread starter paddythegreek
- Start date
That's paxolin resin board. Good electrical insulator but not really designed for high voltage or as a heat insulator.
Pehsps the PCB is shot underneath?
If not then I'd just but long-legged bridges and this will allow better airflow and extend their life.
Hth..
Tim
Pehsps the PCB is shot underneath?
If not then I'd just but long-legged bridges and this will allow better airflow and extend their life.
Hth..
Tim
I see they're rear mounted. That's that then!
OP
OP
Yea was just gonna put that. As you said the plate they bolt to acts as a heatsink. Pcb is fine I just need it as a insulator
