BM66 LE Topper help

[Dave Bishop]

Hi All

Could someone tell me if the Node boards that are with the topper are in the box with the topper? Or are they already fitted to the backbox from factory?

thanks

 

[Deleted member 2463]

Fitted to the back box from factory.


Sent from my iPhone using Tapatalk Pro

 

[Deleted member 2463]

Have you bought the topper of someone?


Sent from my iPhone using Tapatalk Pro

 

[Dave Bishop]

Possibly,
are the boards specific? Or can I get them again?

 

[Dave Bishop]

@Neil McRae
Thanks for the help, can I ask how the plate at the top Attaches to the backbox? - the 3 screws along bottom? And what the boards connect to?

From the Internet I see the boards on the plate - wire loom going between the boards and couple of wires..power going to bottom board and cable going to CPU. Is that it?

 

[Deleted member 2463]

Boards are specific - nobody has so far been able to buy them without the LE other than one guy who I know sold his topper of an LE, if stern did start selling them I’ll be in the blower to Gary Stern to moan about it.

Neil.


Sent from my iPhone using Tapatalk Pro

 

[Dave Bishop]

May get it from an LE owner..

 

[Deleted member 2463]

So there is a plate and three boards, one a node board and the two others power boards.




Sent from my iPhone using Tapatalk Pro

 

[Deleted member 2463]

I went with docquests batman '66 signal lamp also as it was brighter and a hell of a lot cheaper - doc figured out an excellent way to connect it and have it just like the stern one:

https://pinside.com/pinball/forum/topic/diy-tutorial-batman66-bat-signal-projector

 

[Dave Bishop]

Are there any wires below the playfield?

 

[Dave Bishop]

OK - new issue.. does anyone know how to focus the Projector from stern?

 

[Dave Bishop]

Instructions only have this

no

 

[Deleted member 2463]

Nope - nothing below playfield.

The focus must be on the lens is there nothing to turn?




Sent from my iPhone using Tapatalk Pro

 

[Deleted member 2463]

Hmm - is that the right projector for the LE topper? The Premium and LE have different projectors. That looks like a premium projector which I didn’t think worked with the LE topper?


Sent from my iPhone using Tapatalk Pro

 

[Dave Bishop]

It’s this one. Official Stern one.

 

[Deleted member 2463]

Actually I’m talking ******** on that apologies.

It’s the way that it connects thats different on this on the premium it connects to the main CPU board and to the power board at the bottom of the backbox.

Sent from my iPhone using Tapatalk Pro

 

[Garry Sp8]

OK - new issue.. does anyone know how to focus the Projector from stern?

Don’t you just pull the lens in and out? That’s what I did on mine which was for the villains topper.

 

[Dave Bishop]

Yeah , Thanks Gary, managed to work it out in the end.

 

[CHRIS B PINBALLS]

On the le the projector is controlled on the premium I think it just lights up

 

[Dave Bishop]

It has a data cable, goes on and off when commissioner Gordon rings.