Widnesbernie
Site Supporter
I have replaced all 7 of the wire rollovers as they were bent & battered. Adjusted a couple of the switches. No adjustments were made with the machine turned on.
I did not notice the problem when the machine was turned on. It had been on attract mode for about half a hour. I got a burning smell which did not last long, but I don't know which of the 3 machines it had come from. The only machine I have a problem with is the Blackout.
In attract mode row the lamps in row 7 are stuck off and row 8 is stuck on.
If I start a game row 7 is off and row 8 is on, but if I press either or both flippers, the row 7 lights seem to be trying to go through the attract sequence, but are flickering when they are on.
In lamp test row 7 stays off & row 8 stays on.
I did not notice the problem when the machine was turned on. It had been on attract mode for about half a hour. I got a burning smell which did not last long, but I don't know which of the 3 machines it had come from. The only machine I have a problem with is the Blackout.
In attract mode row the lamps in row 7 are stuck off and row 8 is stuck on.
If I start a game row 7 is off and row 8 is on, but if I press either or both flippers, the row 7 lights seem to be trying to go through the attract sequence, but are flickering when they are on.
In lamp test row 7 stays off & row 8 stays on.
Last edited:
