Found it! Black Rose complete main central wire ramp or end stop piece

[Muddymusic]

Desperately need the main wire ramp for Black Rose, the one on this one is totally screwed. I guess the previous owner had the end piece with the ball diverter snap off or got too many air balls so cut it off, and to compensate for that then proceeded to completely buckle the whole thing out of shape as you can see in the photo.

Currently any balls sent down this ramp go straight down the middle so the game is pretty much unplayable for any length of time, so I'd be really grateful of any help getting this fixed as the pin is spot on aside from this!

Here's how it should actually look!

 

[replicas]

I have one from a parted out machine, need a clean but all there and in so much better condition than what you have there.
D

 

[Muddymusic]

Fantastic, that sounds perfect! I'll drop you a pm.

 

[Scott]

Any chance you have the complete left 2 ramps that are riveted together?

 

[replicas]

Any chance you have the complete left 2 ramps that are riveted together?

Let me have a picture of what you need and I will see what I have.

 

[Scott]

I have this diagram from the manual. I really need ramp 3 but ramp 4 is riveted to it at the top so both would be awesome. But 3 is really the most important. Thanks for looking

 

[replicas]

So you need the plastic ramp on the left hand side.

 

[Scott]

Yes. That's the one. And it is riveted to the plastic ramp labeled 4 by a flexible metal. So it's technically 2 separate ramps but joined.

 

[Scott]

Oh if it helps too on the picture above it's the ramp with the splash and canon ball on it. And the ramp labeled Davey jones locker is attached to it. Thanks

 

[replicas]

Pretty sure I have what you need but can't get to look till after the weekend.
Will get in contact when I find them out.
D.

 

[Scott]

Sound great. Thanks again