Wanted Black Knight 2000 drawbridge target bank Motor

[kevlar]

Does anyone have a spare motor part number #14-7941-3 ?

It's used on a few machines, BK2K and Cyclone according to Marco, maybe others.

Mine is still working but has played up a little, one of the gears being a bit worn. I've managed to keep it going so far but it will probably fail eventually. Just thought I'd look out for a 2nd hand one before ordering a new one.

 

[Jay Walker]

Does anyone have a spare motor part number #14-7941-3 ?

It's used on a few machines, BK2K and Cyclone according to Marco, maybe others.

Also Pin-Bot, I think. And very likely Mousin' Around. If you're unlucky, those motors can start running backwards, which wipes the roller arms off the Up/Down micro-switches.

 

[kevlar]

Thanks David. I opened up the gearbox yesterday and was a bit shocked by it's anti-run back method which is doomed to fail and wreck the teeth on the little pinion gear. Got it running by just tightening everything up by forcing the backplate to fit tighter with the help of a little shimming but it isn't going to last forever.

 

[Mooseman]

And AFM

 

[RudeDogg1]

Is it the same motor used on the tz clock? If so I know a euro site with one

 

[Jay Walker]

Could've also been used for the rising ramps on Jokerz! and Fire!, Kev. But not the Ferris wheels on Hurricane - that's a 50v version of the same type. I ruined a motor like you need by using it on that game.

 

[kevlar]

There are a million different motors on marcos website, some look nothing like this one ( AFM and TZ clock for instance ) while others look very similar but have different part numbers ( but may well be suitable )

Bit of a minefield!

 

[RudeDogg1]

Oh if it looks diff I normally don't risk it

 

[kevlar]

Oh if it looks diff I normally don't risk it

Lol, there's a lot more to a motor than how it looks also Rudi, can't just chuck anything on there that fits, see David's post above.