Found it! Bally Strange Science Neon Wiring loom or pics of...

[Courtney Blush]

Anyone help with this please?

I have a neon, transformer and neon mounts but not the small wiring loom to connect it all together to the driver board.

Does anyone have one, pic of one or can someone make me one please?

I have already checked the manual and it doesn't describe it or show it.

Thanks so much

Courtney xxx

 

[J P]

Courtney,

I've checked my manual an no refrence to the board in that either. I've attached a picture of the board I think you are referring to. J2 and J3 are where the Neon topper is connected to. It has a model number on the board, so hope that helps.
JP

 

[Courtney Blush]

I have the board. J2 feeds the bulb in the back box and J3 goes to the neon.

 

[J P]

Oh yes, one to each - haven't had them connected for a while. I can take more pics but not sure what of, that would help.

 

[Courtney Blush]

The board I have is fine, I am missing the wiring loom from the Mains Transformer to the Neon Transformer via J3 on that board

 

[J P]

Ah, so pic didn't help. Sorry I couldn't help.

 

[Courtney Blush]

Thanks anyways JP

 

[Pick Holder]

Surely it's 110v ac out?
Obviously that means polarity does not matter.
Just mate a lead up and put heat shrink over the connector
Does it take the normal Bally/Williams gi connectors.

 

[cooldan]

Ask Dawn. She has a Strange Science, and I'm sure one of the kids would take some pictures to help. Then post the pics up on here with all connectors showing and someone clever will make you a loom. Or if they won't, I could have a try.

 

[Courtney Blush]

Hey all, a friend has kindly made me one. Pick, you're quite right it is only 110v AC but the connectors are not the normal GI ones. Couldn't find them on any of the pinball sites.