Hello all,
Loads of Manuals have the Babcock Schematic printed and it always is the 01 version. Namely GD-032D128-01.
I have an 02 version which has some obvious dead/shorted components, if they were comparative to the 01 version then it would
only be a couple of pounds worth of bits and worth an attempt at repair as I know the glass was good.
I know there have been previous requests for the schematic of the later model GD-032D128-02
My Dilemma is this,
I have now discovered that I actually have a working 01 version of this board and it is rather obvious when looking at the components
on the back that it is significantly different from the 02 variant. So I cannot trust that the parts identified on the 01 Schematic are the
same as those required for the 02.
I don’t require the Schematic, but would like a parts list for the 02 version if anyone knows of the existence of such a document please.
The larger caps have identifiers on them and Resistor values can be compared with a good working 02 version that I have,
but the small SMD components, capacitors and diodes etc that I need to replace are:-
C1 & C13 47uF 50v
C14 10uF 25v
C2 ?
C5 ?
C15 ?
D1 ?
D2 ?
Q1 ?
Q10 ?
Any help appreciated thank you
Loads of Manuals have the Babcock Schematic printed and it always is the 01 version. Namely GD-032D128-01.
I have an 02 version which has some obvious dead/shorted components, if they were comparative to the 01 version then it would
only be a couple of pounds worth of bits and worth an attempt at repair as I know the glass was good.
I know there have been previous requests for the schematic of the later model GD-032D128-02
My Dilemma is this,
I have now discovered that I actually have a working 01 version of this board and it is rather obvious when looking at the components
on the back that it is significantly different from the 02 variant. So I cannot trust that the parts identified on the 01 Schematic are the
same as those required for the 02.
I don’t require the Schematic, but would like a parts list for the 02 version if anyone knows of the existence of such a document please.
The larger caps have identifiers on them and Resistor values can be compared with a good working 02 version that I have,
but the small SMD components, capacitors and diodes etc that I need to replace are:-
C1 & C13 47uF 50v
C14 10uF 25v
C2 ?
C5 ?
C15 ?
D1 ?
D2 ?
Q1 ?
Q10 ?
Any help appreciated thank you