AQ 25/500 34/4500 DC COIL Wanted please with two diodes.
Or maybe a suitable replacement?
Thanks
Or maybe a suitable replacement?
Thanks
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Wanted AQ 25/500 34/4500 DC COIL (Bally)
- Thread starter deathrow
- Start date
OP
OP
excellent, Thanks GrizZ 
OP
OP
anyone?
Pinball Heaven have that one listed I believe.
http://www.pinballheaven.co.uk/shop/product_info.php?products_id=244
http://www.pinballheaven.co.uk/shop/product_info.php?products_id=244
OP
OP
Do you know if it makes any difference in how the diodes are fitted?
Mine are wired slightly different on each coil.
Mine are fitted like this one...
http://www.ebay.co.uk/itm/350505249944?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Thanks for the link
Mine are wired slightly different on each coil.
Mine are fitted like this one...
http://www.ebay.co.uk/itm/350505249944?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Thanks for the link
Well I'm a newbie but looking at the pictures I'd say the one at PH would be just fine, but if you want to be sure I'd just drop them a line for confirmation.
Alternatively if you have the old coil but its burnt/sticking then you can always compare when it arrives are resolder as required. From the looks of the pictures the centre post is just being used to link the diodes in series?
Alternatively if you have the old coil but its burnt/sticking then you can always compare when it arrives are resolder as required. From the looks of the pictures the centre post is just being used to link the diodes in series?