I'm going to order an outside edge hardtop playfield. If anyone is thinking same, LMK and we can order together.
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Anyone thinking of ordering an Outside Edge hardtop - share postage?
- Thread starter AlanJ
- Start date
Outside Edge Hardtop pinball
Home of the Hardtop pinball playfield solution, with the highest quality licensed art from Williams, Bally and Gottleib
www.outsideedgeproducts.com
Widnesbernie
Site Supporter
I have been on the fence about doing this.
I didn't want to sand my playfiels as it is in good nick, but the inserts are really badly cupped.
If you go ahead with an order put me down for a Blackout please.
I didn't want to sand my playfiels as it is in good nick, but the inserts are really badly cupped.
If you go ahead with an order put me down for a Blackout please.
OP
OP
I’m the same. Thinking playboy which is cupped but rest is good and fireball II that’s pretty good to be honest. It might be better for me to find those two playfields in bad condition and then put hardtop on those instead.
Widnesbernie
Site Supporter
You are in playfield swap territory then. I am not looking for that amount of work. Hardtop or leave it alone for me.
OP
OP
But to sand the pf you need to effectively do a swap?
Widnesbernie
Site Supporter
When I did EBD I mounted the pf on a frame and turned it over as required. Only took a couple of bits off the bottom. Can't remember how I made the frame. Will have to experiment when I come to do it.
Widnesbernie
Site Supporter
New item by andrew ellis
photos.app.goo.gl