Anti rattle tape - a nice solution

[Durzel]

On my TAF I've been struggling to find an anti rattle tape that isn't too bulky to make the glass too hard to get in, but also doesn't show on the edges when the glass is in the machine.

Tried several different tapes, the "official" one from Pinball Pro/Flipper Fidelity, cloth ones, "fuzzy" ones. They either made the glass too hard to get in and out, or they were visible when the glass was fitted. Finally found one that works like a charm so thought I'd share it...

FiveSeasonStuff All Season Industrial Strength Single Sided Self-Adhesive Black Foam Tape, Waterproof Shockproof Sealing Tape Roll, Adhesive Weather Strip (1mm (Thick) x 5mm (Wide)): Amazon.co.uk: Kitchen & Home

Great prices on your favourite Home brands, and free delivery on eligible orders.

www.amazon.co.uk

It's 5mm wide and 1mm thick. The seller also does a 2mm thick one. It is a rubberised foam that compresses nicely in the glass channel.

I put it on one side of the glass on both sides, and it worked perfectly. Tight enough to stop the bass rattle, but not so tight that the glass couldn't be taken out easily.





Anyway just thought I'd share the love.

 

[Marvello]

Cheers! Been looking for something like this for my TNA. A Google search led me here

 

[Marvello]

Did yours come from Amazon via Hong Kong?

 

[Marvello]

Might go with 10mm as that is UK dispatch and wrap it around the edge from top to bottom?

Just measured and the glass is 5mm thick so 15mm may be better to wrap around the edge.

The glass in my TNA is not a good fit, it needs to be about 5mm wider for a snug fit so this tape could be perfect.

 

[Marvello]

Measured up with a bit of masking tape and have gone with 10mm, less chance of it showing at the edges. Oh the wonders of Amazon Prime, delivery tomorrow.

 

[Pick Holder]

@Marvello - any chance of a link mate ?

 

[Marvello]

@Marvello - any chance of a link mate ?

FiveSeasonStuff All Season Industrial Strength Single Sided Self-Adhesive Black Foam Tape, Waterproof Shockproof Sealing Tape Roll, Adhesive Weather Strip (1mm (Thick) x 10mm (Wide)): Amazon.co.uk: Kitchen & Home

Great prices on your favourite Home brands, and free delivery on eligible orders.

www.amazon.co.uk

 

[Durzel]

Sorry for delay replying. I went with 5mm because the glass track on my TAF is slightly wider than the glass, and I didn't want the tape to be visible.

I thought about getting 10mm and wrapping around but wasn't sure if it would stay stuck on.

 

[Andy Hancock]

Measured up with a bit of masking tape and have gone with 10mm, less chance of it showing at the edges. Oh the wonders of Amazon Prime, delivery tomorrow.

Could you let us know how that goes as I’m thinking about 10mm or 15mm wrap around solution

 

[Marvello]

Could you let us know how that goes as I’m thinking about 10mm or 15mm wrap around solution

Ok, 10mm fitted, no more vibrations . I don't think 10mm is wide enough to cover top, bottom and side. I tried it with a small piece and it didn't leave enough on the top and bottom, can imagine it coming unstuck and besides having it on the top and bottom may make it too difficult to get the glass in and out. 15mm wrapped around may be too wide so you see the tape and also too tight a fit.

I placed it so there was approx 5mm on the bottom of the glass with the other 5mm wrapped around the side. Nice snug fit and hopefully will be able to get the glass out and back in again without it coming unstuck.

If it does come unstuck I'll do as the OP did and just place 5mm on the bottom and trim the rest off.

I've got enough left to do my VP cab too.

 

[Marvello]

Had the glass out a couple of times and the tape stayed in place, top stuff and I can increase the volume now.