Alien (Heighway Pinball) - wire popped out of Molex, please tell me where it goes!

[davejuk]

I recently moved my Alien (Heighway) and when I have gone to reattached the backboard, this brown (presumably 240V AC live wire?) has come out of the molex connector and it isn't obvious to me where it goes back in.

I am struggling to find any documentation or pics so if another owner can check then it would be greatly appreciated!

Mine is an LE, if that makes a difference.

Thanks

 

[David_Vi]

@Mike Parkins might know

 

[Crewey]

Also try the Pinside thread for Heighway Alien it’s regularly active

https://pinside.com/pinball/forum/topic/alien-pinball-official-game-thread/page/605

 

[J.C.Rox]

What does the molex connect to? Can you match it up to where it connects to to see which hole the lose wire goes into?

 

[Arv]

Unlucky it's the brown wire.

"Game over man, Game Over."

 

[Mike Parkins]

That looks different to my connector - There is no mains voltage going through mine and no Blue/Brown/Green wires.
The red/black are the speakers, the Yellow/Black is 12V to the monitor, the rest should be controlled 12V to the beacons and the LED tape.
I'll check mine again when I get home from work though.

 

[Vimtoman]

Some of these pins were made up from spares so you may find the wiring to be different.
Best bet is to work out what the wiring is doing etc.

 

[Mike Parkins]

Looks like your brown wire goes in the third from the left, between the thick black wires.