Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Wanted Afterglow nano (inserts), or LEDOCD. Wpc 89/wpc-s
- Thread starter David_Vi
- Start date
I hope so,
I did get a couple more from him recently but didn't realise I'd get another pin so quick
I bit the bullet and ordered ledocd gi from Comet yesterday but left the inserts one was it wasn't in stock... Only to find out today its back in stock!
So hopefully @stumblor gets some more afterglow out there in coming months
Yeah so I've modified Pelle's design slightly, so that it can accommodate the XH cables + adapters that I put together for the inputs.
For the outputs, Pelle has 'shield' boards that cater for all the flavours.
So what that means essentially is these boards will be plug n play. Which is the best sort of play.
For the outputs, Pelle has 'shield' boards that cater for all the flavours.
So what that means essentially is these boards will be plug n play. Which is the best sort of play.
What’s the cost and does this include all the cables needed. When ordering will you need to specify which machine it’s for as the cables will be different?
Not quite sure yet @Kenny Taylor as I haven't worked out the nitty gritty, but aiming to have them around £80, including all the cabling.
When ordering you can specify the machine and I'll provide those adapters/shields/cabling, but the additional adapter flavours can be bought separately in case you need to repurpose a board later on.
When ordering you can specify the machine and I'll provide those adapters/shields/cabling, but the additional adapter flavours can be bought separately in case you need to repurpose a board later on.