Found it! Afterglow cables for Whitestar/SAM

[kevin_smith]

I recently bought an Afterglow board from PinballCenter https://www.pinball.center/en/shop/pinball-parts-by-game/the-lord-of-the-rings/11756/afterglow-extension-board-whitestar?number=67574 but it turned out that unlike the one from @stumblor they did not provide any cables . Does anyone have a spare cable set they'd be willing to sell me?

Thanks!

 

[M4carp]

I have a spare set from Stumblor‘s kit that uses a piggy back board for his, are these cables ok?

 

[David_Vi]

I have a spare set from Stumblor‘s kit that uses a piggy back board for his, are these cables ok?

Those won't work as one connector is too small.

Someone could make the correct cables easily if they know what pins and size.

 

[kevin_smith]

Those won't work as one connector is too small.

Someone could make the correct cables easily if they know what pins and size.

Thanks. That's annoying. The Afterglow board 2.1 I have seems to have symmetrical connectors that match the Stern for both In and Out.
So would need to change the small connector on Stumblor's to match the opposite end.

 

[kevin_smith]

Looks like I'll be learning how to use a crimping tool I watched all the how-to videos and have the bits on order...