Ac/dc lamp flicker during RGB lamps

[Spadge]

so on my AC/DC Premium this started getting pretty bad clicker on the GI/lamps.

I’ve taken a while I’m diagnostics and it appears to be when the RGB lamps are in use, if you go to DIAG/AC/DC/RGB TEST the lamps will be stable until you go into the test. If you turn each of red, green, blue off then all flicker goes away.

Any clues as to what controls this or related to it?

Obviously likely similar on other sterns.


Cheers

 

[Spadge]

FIXED. Found a thread reporting a similar problem in Australia.

Basically you need to re-seat the 4 spade connectors on the rectifier in the back box lower left.

Now my GI's are behaving again. (AC/DC premium, a PRO wouldn't have same issues as non RGB leds).