Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Found it! A-19514 - Pinball Legs Chrome (x 8)
- Thread starter s000m
- Start date
Ashbo
Site Supporter
That's the problem with FB, any issues with your pin and you don't have a leg to stand on!
God make the dad jokes stopThat's the problem with FB, any issues with your pin and you don't have a leg to stand on!
Existing ones are normal wear and tear but as with all my pins I want it looking at its best!
Ashbo
Site Supporter
Sorry, it's been a LONG week. Just running out of legs....God make the dad jokes stop
Existing ones are normal wear and tear but as with all my pins I want it looking at its best!
Just order from the usual places. They're cheap enough for new.
One stop has the cheapest at £66 but has been out of stock for a while. I see no reason to pay more than I have to.
You’ll prob pay 40 or 50 + shipping for good used . A slightly rusty set went on eBay for 49 last week.One stop has the cheapest at £66 but has been out of stock for a while. I see no reason to pay more than I have to.
For the sake of a few quid if you want it to look the best just buy new .
Yh but new is £90. It's not a few quid difference that's £60 difference once I have bought 8. Unless someone can point me to a new set available for £60 in stock?
You have probably paid 60 in the past for a few small pieces of plastic
Lovely shiny new legs actually seem very reasonable compared to most pin parts. Dont be a cheap bastard …. And this comes from a lifelong cheap bastard 
if you see a cheap price on any parts suppliers website and it is oos, then the price is the price they probably last sold at (months or years ago). as soon as they restock they will update the price to the going rate.
check out @pinballmania for good leg prices www.pinparts.co.uk
check out @pinballmania for good leg prices www.pinparts.co.uk
As Alan said I suspect one stop price is from years ago
The problem is they all come from the states and are only really viable if you are shipping a large amount in a container ie not paying on weight in a box ph orders 100 sets a time you should see how much that weighs I know as I help phil out putting them all in to stock
The problem is they all come from the states and are only really viable if you are shipping a large amount in a container ie not paying on weight in a box ph orders 100 sets a time you should see how much that weighs I know as I help phil out putting them all in to stock
Yeah but go for a powder coat. When in Rome and all that.
I see the @pinballmania for good leg prices www.pinparts.co.uk are out of stock..... will need to get hunting - do people buy old used but not great nick legs?
Yeah that's the price I found. Hes away till the 5th. So will wait till he gets bk to see if more come in.
Powder coat is best to use on good or mint condition.
I had side rails done recently and some dings show through.
You can buy un-chromed legs but only found them from pinballshop.nl
do I need to powder coat new ones? (that may be a dumb question)
Not sure I get what you mean?
If you mean for when powder coating should I use new over used then yes I would recommend unless the used are in great condition.
If you mean just in general when buying powder coats are down to you as an aesthetic purchase.
They just look better and make your machine look more premium.
It's not a necessity.
Ah - ok ... I see pinball Heaven have sets at £90 - not inc postage.
Chrome leg set (inc bolts/levellers/nuts) - Pinball Heaven
4 chrome legs (A-19514) 4 leg levellers 8 leg bolts 28 1/2″ leg (without levellers installed – so range 28 1/2″ to 29 3/4″)
www.pinball.co.uk
Yup we've gone full circle. Now Griz will call me a cheap bastard for waitingAh - ok ... I see pinball Heaven have sets at £90 - not inc postage.
Chrome leg set (inc bolts/levellers/nuts) - Pinball Heaven
4 chrome legs (A-19514) 4 leg levellers 8 leg bolts 28 1/2″ leg (without levellers installed – so range 28 1/2″ to 29 3/4″)
In my opinion 'cheap bastard' is the only way. Especially after 6.5k for my first pin.Yup we've gone full circle. Now Griz will call me a cheap bastard for waiting
I also called myself a cheap bastard.Yup we've gone full circle. Now Griz will call me a cheap bastard for waiting
Now just buy the frickin legs
You're not the boss of me!I also called myself a cheap bastard.
Now just buy the frickin legs
It can wait till pin parts gets back.
Andy from Pinparts got back to me. They are out of stock and awaiting supply from the US. Once supplier has stock it will be 6 weeks to arrive in the UK and then availiable to order.
Just in case anyone else is wondering.
Cheers,
Scott
Just in case anyone else is wondering.
Cheers,
Scott
- Joined
- Jul 21, 2011
- Messages
- 2,474
Unfortunately supplier has no stock, so awaiting info on when they will be available. I do know the wholesale price has increased to me, so you can expect them to be £10 or so more expensive when they become available. My price excludes feet and bolts which can be ordered separately,
- Joined
- Jul 21, 2011
- Messages
- 2,474
Supplier informs me that legs are scheduled to be manufactured at end of April. Assuming that happens then with shipping by sea, you might expect new stock to be available here in June/July.
- Joined
- Jul 21, 2011
- Messages
- 2,474
Legs are now on order, and anticipate delivery here early July.
Bally Williams Full Rib Chrome
Full Rib Black
No rib Chrome
And
Stern 31.5” Black
all on order.
Unfortunately you can expect a price hike
Bally Williams Full Rib Chrome
Full Rib Black
No rib Chrome
And
Stern 31.5” Black
all on order.
Unfortunately you can expect a price hike
If you phone Phil he will sell you four legs
Or four candles……
Or four candles……
- Joined
- Jul 21, 2011
- Messages
- 2,474
Legs and other cabinet parts back in stock.