I have a few of these. I get them from time to time. They are optional feet for a certain brand of air compressor I repair / replace. It hit me a while back that they are suitable for the front feet on pinball machines. Mainly for those who have nice solid floors.
They are 10mm thread so it's not plug and play but ive checked a couple things out. Most machines are put on flat surfaces and the front is usually as low as it goes
My floor is an a slant and carpeted so im gonna fit these - except on TNA
Now - the thread is 10mm and 15mm long so there are 2 ways around this
1. either use something like this - https://www.ebay.co.uk/itm/18559178...pid=5338674831&customid=&toolid=10001&mkevt=1
2. Remove the 3/8 female insert and fit the foot direct using the nut and washer. To level out fit additional washers but prob never need to do this
These are excellent quality. Research puts similar spec models at around £22 per foot Plus P+P - for example here is the nearest I could find quickly https://www.bearingboys.co.uk/?catid=17555&display=&orderby=&att1=70mm&att2=35mm&att3=&att4=&att5=
Mine are 70mm OD and 20mm Thick
If anyone is interested....... 1 set I can do for £20 posted UK
They are 10mm thread so it's not plug and play but ive checked a couple things out. Most machines are put on flat surfaces and the front is usually as low as it goes
My floor is an a slant and carpeted so im gonna fit these - except on TNA
Now - the thread is 10mm and 15mm long so there are 2 ways around this
1. either use something like this - https://www.ebay.co.uk/itm/18559178...pid=5338674831&customid=&toolid=10001&mkevt=1
2. Remove the 3/8 female insert and fit the foot direct using the nut and washer. To level out fit additional washers but prob never need to do this
These are excellent quality. Research puts similar spec models at around £22 per foot Plus P+P - for example here is the nearest I could find quickly https://www.bearingboys.co.uk/?catid=17555&display=&orderby=&att1=70mm&att2=35mm&att3=&att4=&att5=
Mine are 70mm OD and 20mm Thick
If anyone is interested....... 1 set I can do for £20 posted UK
