5V or 12V feed in flipper area???

[Paul]

Guys,

just wondered if anyone could advise - is there a +5v or +12v dc feed anywhere near the flipper button of an Addams Family at all? Looking to add a Mod, however not sure if either is present anywhere around there...

Cheers
Paul

 

[Calimori]

There is 12v feed from the board below the left flipper, there are pins going to the coin mech which are 12v, useful if you are not using it. I made up a molex connector and that feeds the LED strip lights for TAF, underneath, along the topper and across the back over the ramp and THING's box.
I can take a picture later if you need it.

 

[Rus121]

I can get 12v from my Great Lakes Modular 16 opto board in No Fear and powered the first apron monitor i had from it. Whilst it is 12v, it is unregulated and could explain why that perticular monitor no longer turns on. Drpinball built me a regulated 12v psu which i now power my apron lcd from. Are you thinking of doing something similar with your TAF? I just get that feeling so i thought i would mention how i power my apron monitor.

 

[Paul]

Are you thinking of doing something similar with your TAF? I just get that feeling so i thought i would mention how i power my apron monitor.

Nope - nowhere close Well not true - hadn't even thought of that yet - as you said in your previous post - I'm waiting to see what Dave comes up with on that front.