What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

3D PRINTING HELP - in a hurry !

Pick Holder

Pick Holder

Site Supporter
5Years
Joined
Jul 18, 2016
Messages
5,753
Location
Bournville, Birmingham.
Hello all.

I need this printed - it is a gear for a reel to reel tape recorder.

Gladly pay of course but need it in the post to me swiftly.

cults3d.com

Gear Philips N7300 N7150 friction wheel mechanic

Test with TPU Works fine 0.2 Nozzle or smaller
cults3d.com cults3d.com

Will gladly paypal gift across.

I do not know what it should be printed in.... it is a tiny part - fits over a small spindle motor.
 
Sorry Phil, my 3 printers are all in constant use and I don't currently have the capacity.

Maybe @Calimori , @SeikoKid , @HomerRamone , @Paul or others could help.

They will need a Cults 3D account to be able to pay for the file to be downloaded (83p), unless you download it and email it whoever can help.

Good Luck
 
Let me know if that doesn’t work out as I can do it for you.
How much did they charge you?
I can imagine that the person wants to recoup the cost if the equipment and make a bit of profit. And 3D printers are addictive. It is hard to own one and not keep updating.
 
Calimori said:
I can imagine that the person wants to recoup the cost if the equipment and make a bit of profit. And 3D printers are addictive. It is hard to own one and not keep updating.
Click to expand...
Ive had little success doing that. Mind I did go out of my way to do so - put a few prints on fleabay. But not only did I get no bits I got next to zero views :(
 
Pick Holder said:
Don't worry guys - someone selling it online. Forking rip off for a part 5mm in diamter and 9mm tall but at least I can get the thing going this side of xmas as it will be in post at 10am.
Click to expand...
You are paying for the guys time Phil. No matter how small or big the part there is always the fixed cost/time of downloading the file setting up to print checking the part packing it up posting it and even postage costs for anything 3D are relatively fixed price these days.
 
Asiapinball said:
You are paying for the guys time Phil. No matter how small or big the part there is always the fixed cost/time of downloading the file setting up to print checking the part packing it up posting it and even postage costs for anything 3D are relatively fixed price these days.
Click to expand...
I wouldn't be charging any more than 50p plus postage for this. it will literally take no more than 15mins to print and use about 3p of filament
 
HomerRamone said:
Ive had little success doing that. Mind I did go out of my way to do so - put a few prints on fleabay. But not only did I get no bits I got next to zero views :(
Click to expand...
There are so many people selling 3D printed things on Etsy and eBay , the majority just using files they've found free. You really need something unique and niche you've designed yourself to have any chance.
I'm getting stupid amounts of orders for my cooling units from the States, that I've had to tell people I can't get them out to them until the New Year, main hold up being assembly of the power loom.
 
The stuff I put on there was stuff from Patreons that allow you to sell. Grogu with his Ice cream was one. An assorted selection of wibbly animal keyrings was the other.
I get might not be everyones cup of tea - but not even any views. Maybe I should have got the AI to write the title and description :D
 
I need to print pinball trophies for the club on my new Bambu Labs. Anyone point me to any files
 
You must log in or register to reply here.
Back
Top Bottom