The 31" rear legs on my Victory are too high, so looking for 2X un-ribbed 27" or 28.5" legs in any condition. May consider full set of 4 if don't want to split two out. Ta.
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Wanted 27" or 28.5" unribbed legs X2
- Thread starter JMP
- Start date
John,
I have two 28.5". Will need new feet. One is Black and the other is dark Blue. Any good?
I have two 28.5". Will need new feet. One is Black and the other is dark Blue. Any good?
OP
OP
Thanks Dave, maybe… but forgot to say looking for chrome if poss. Let me get back to you if nothing else comes up, cheers.
I have 2 x 29-1/2" chrome legs.
The measurement from the bottom of the bottom hole is 1/2" longer than the standard 28-1/2" ones. The other 1/2" is on the top part of the leg making them 29" on the machine. Slight surface rust which should polish out ok. Ken
The measurement from the bottom of the bottom hole is 1/2" longer than the standard 28-1/2" ones. The other 1/2" is on the top part of the leg making them 29" on the machine. Slight surface rust which should polish out ok. Ken
OP
OP
Thanks Ken, but probably too long... think I've sourced some black ones on a swap now. Any chrome ones at 27" still of interest.