Bought 2 x 2" for my Frankenstein as Andy didn't have any but they're too tight and keep kicking after the ball has hit the sling. Anyone have 2 to sell please. (yes they should be 2-3/4")
Thanks Ken
Thanks Ken
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Wanted 2 X 2-3/4" black sling rubbers
- Thread starter paddythegreek
- Start date
Pinball heaven or just adjust the switches with some needle nose pliers so they are further from the rubber...
- Joined
- Oct 21, 2013
- Messages
- 2,115
use 2 1/2"
Agreed...otherwise under extreme speed you run the risk of losing the ball inside the sling!
OP
OP
Its got 2-1/2" on now but its as tight as buggery to use a technical term. Book says 2-3/4. Ok ill live with it.
I did the same on TZ no probs
- Joined
- Oct 21, 2013
- Messages
- 2,115
tz is 2"!
I'm sure the rubber diagram in manual says otherwise but im not near my pins to prove it, to be continued....!!
I'll get my coat....
- Joined
- Jul 21, 2011
- Messages
- 2,474
I have 2-3/4 black in stock now.