sound

Hello everyone, during my last restoration I decided to finally take the time to work on an idea that I had a while ago. I wanted to get a better sound experience from my pinball machines, something that would really make a memorable restore. The result far exceeded my expectations! I wanted...

Bought these both in error so they are unused Data East/Stern Dot Matrix driver Board by Rottendog - £120 posted Data East 520-5050-00 / 520-5050-01 / 520-5050-02 Sound Board (can flash ROMs for your game) - £135 posted I also have a broken DMD for sale if anyone wants it for testing purposes.

Starting to give up on repairing the Sound Board of my Star Wars 520-5050-00 Does anyone have a spare or an replacement upgrade like pinsound? Thanks!

I'm fault finding the sound board on my Star Wars. It would be really helpful if someone could tell me the what reading they get with aLogic Probe on the Reset Pin of the BSMT2000 chip. The BSMT2000 chip is usually position U9 on the sound board and the reset is pin 4. AFAIK all Data East...

Hi all! Been trying to get this sound board going. All I get is a kind of air/static sound from the speakers that can be made softer and louder with the volume pot. I believe the board was pulled from a LW3 and I'm fitting it onto a star wars. I have burned the right EPROM sizes for U17 and U21...

Hi, on July 8th I gave a talk about game and pinball audio at Pintastic. I've edited a video in case you are curious. at 3:22 min in I talk about Dialed In at 40:08 there is a Klingon sing-a-long at 43:41 I feature Lexy Lightspeed Escape from Earth on the P3 system at 52:00 min in I talk...

Hi Guys, Hope you can be able to help me... Feel like I have tried everything. My problem is my Getaway Highspeed II have a "CHKSUM ERROR U18" in the error log, also there is no sound on the machine... There is 3 "bong" when it boots, but no audio in the game at all. I have checked the ribbon...