Molex 0.1"/2.54mm Crimp Housing for Large Headers

[astyy]

I need to replace connector MPU A4-J4 on my VECTOR which is 19 way. I can't find Molex KK 254 0.1" crimp housing online with any more than 15 circuits.

I could use two housings and fit either side of the key to kind of polarize it but this doesn't seem neat.

Is there an alternative for the long connectors? Excluding the test connector several on the Bally boards are 28-way max.

 

[astyy]

Marco lists a 28way 0.1" housing - these would be ideal to cut down.

Does anybody know a source of these over here?

Thanks

 

[ronsplooter]

Email the Legend @pinballmania and see if he's got any

 

[stoptap]

I need to do the same connector so a closer supplier would be fine and dandy.

 

[astyy]

Per Rons suggestion 0.1" 21 way crimp housings are listed on The Legends website which'll suffice for A4-J4 and most others but he's closed until 7th March doing whatever Legends must to recharge.

Big Daddys website is a useful resource of what's available and applicable.
http://www.bigdaddy-enterprises.com/electronics/e_connectors-100.htm